Connect the power supply to the DP-01FX. Turn the POWER switch to the ON position. Press the MENU key when the unit is powered up. Press the right arrow key to access the song creation menu. Press the right arrow key again until the display reads CREATE. Press the right arrow key again. Title the song using the jog-wheel and arrow keys. Press ENTER when finished.
Connect headphones to the HEADPHONE jack on the front of the unit. Alternately, connect powered monitors to the STEREO MIX L-R jacks on the rear of the unit.
Lower the MASTER fader on the top of the unit to zero. Connect an instrument or microphone to the INPUT A jack on the front of the unit. Switch the MIC/LINE GUITAR switch to GUITAR if using a guitar, or MIC/LINE if using a microphone or synthesizer. Raise the MASTER fader to seven.
Press the ASSIGN A key on the top of the unit while pressing the REC key for track 1 to assign input A to track one. Press the REC key to enable recording for track one. Raise the track one fader to set the recording level and monitor playback.
Press the RECORD and PLAY keys simultaneously to begin recording; note that the REC key light stops flashing and becomes solid red. Press STOP when done recording. Press REWIND to return to the beginning and listen to playback.
Disable input assign for track one by pressing ASSIGN A and the REC key simultaneously. Press the REC key to disable recording for track one. Press the ASSIGN A key and the REC key for track two. Press the REC key to enable recording for track two.
Raise the track two fader to set the recording level and monitor playback. Raise the track one fader to set the playback level for track 1. Press the RECORD and PLAY keys simultaneously to begin recording; note that the REC key light stops flashing and becomes solid red for track two.
Press STOP when done recording. Press REWIND to return to the beginning and listen to playback.