Help Instrument cluster removal on a 91 Stanza. The trim piece that holds hazards cruise contr switches and also goes around the heater controls radio will not come off. Help?

To remove the cluster you have to remove this trim. Below are instructions from the FSM on removing the trim bezel.

1) Remove the console wood grain trim, if so equipped.

2) Remove the hazard warning switch, fog lights switch and cruise control switches (if so equipped).

3) Remove the ash receiver assembly by sliding it out from the instrument panel.

4) Remove the heater control cover, two screws at top and two screws at the bottom.

5) Remove the four instrument panel bezel retaining screws, remove the center bezel. Then remove the two cluster bezel retaining screws and remove the cluster bezel.