DIY Guitar Pick from Hard Plastic: 5 Steps to a Custom Plectrum
Making your own guitar pick is a satisfying micro-project—costs pennies, takes 15 minutes, and lets you customize thickness, shape, and grip.
Materials
- Hard plastic sheet: ABS, polycarbonate, or PVC (1.5–6 mm thick). Old credit cards, gift cards, or plastic container lids work in a pinch.
- Tools: Jigsaw (or coping saw), fine-tooth hacksaw, sandpaper (progress from 220 → 400 → 600 grit), drill with small bit (1–2 mm) for lanyard hole.
Process
- Trace: Outline a standard pick shape (teardrop, jazz III, triangle) on the plastic with a fine marker. Or design your own.
- Rough cut: Jigsaw outside the line—leave margin for finishing.
- Refine edges: Hacksaw to the line. Take it slow; plastic melts if friction gets high.
- Sand finish: Progress through grits until edges feel glass-smooth. Round the tip slightly for string release.
- Drill hole (optional): Top center for lanyard/keychain. Deburr both sides.
Test & Iterate
Play it. Too thick? Sand the faces thinner. Too slippery? Score grip lines with a hobby knife. Sharp tip catching? Round it more. The beauty of DIY: version 2 takes 10 minutes.
Safety note: Wear eye protection. Work in a ventilated area—plastic dust isn't healthy. Secure the workpiece; don't hold it by hand while sawing.