Are All Yamaha Sustain Pedals Compatible with Every Keyboard? No—Here's Why
No. Yamaha sustain pedals (often called "footswitches" or "FC series") are not universally compatible across all keyboards and digital pianos. Compatibility depends on critical technical factors.
Critical Factors
- Polarity (Normally Open vs. Normally Closed): Keyboards expect either a normally open (NO) or normally closed (NC) switch. Using the wrong polarity reverses sustain behavior (sustain on when pedal up).
- Connector Type: Most use 1/4" TS (mono) plug, but some older/portable models use 3.5mm (1/8") or proprietary jacks.
- Half-Pedal Support: Advanced pianos (Clavinova, AvantGrand, high-end PSR/S series) support continuous (half-pedal) control via FC3 (TRS stereo plug). Basic FC4/FC5 (TS mono) only do on/off.
- Assignable Functions: Some keyboards allow the pedal jack to be reassigned (sostenuto, soft, expression, patch advance). The pedal must match the expected circuit.
Yamaha Pedal Models
| Model | Type | Plug | Best For |
| FC3 | Continuous (half-pedal) | 1/4" TRS (stereo) | Clavinova, AvantGrand, MODX, MONTAGE, Genos, high-end PSR-S/SX |
| FC4 | Switch (on/off) | 1/4" TS (mono) | Most PSR-E, PSR-EW, DGX, YDP, P-series, NP-series |
| FC5 | Switch (on/off) | 1/4" TS (mono) | Entry-level PSR, EZ, Piaggero; compact, lightweight |
| FC7 | Expression (continuous) | 1/4" TRS | Volume/expression control (not sustain) |
How to Ensure Compatibility
- Check your keyboard's owner's manual → "Pedal" or "Foot Controller" section for required model.
- Match polarity (some keyboards have a polarity switch in settings).
- When in doubt, buy the specific model recommended by Yamaha for your keyboard.
Generic third-party pedals often have fixed polarity and may not work correctly. Yamaha pedals are affordable ($15–$45); get the right one.