Connect the DC power supply (included) to the receiver. The receiver will power on, with a green light indicating it is ready for use.
Align the antennas in an upward-pointing V shape. The two antenna act independently, automatically switching to the one that is receiving the best signal. The "A" and "B" LED indicators show which antenna is active.
Connect the receiver output to an amplifier or mixing console using the XLR or 1/4-inch output jacks. Adjust the output signal using the gain trim knob to obtain a clean, full volume.
Change the receiver channel to receive a clearer signal by adjusting the channel selector switch with a small screwdriver.
Insert a fresh 9-volt battery into the transmitter pack. Use the "ON/OFF" button to power the transmitter on.
Connect the instrument or microphone to the transmitter using the provided cable. Use the "MIC/INST" switch to choose between a microphone or instrument input. Adjust the gain control on the transmitter so that a clean audio signal is sent to the receiver.
Switch between channels on the transmitter using a small screwdriver to set the channel selection switch. Turn off the transmitter before making a channel change, and make sure the transmitter channel matches the receiver channel.