Install the dish outdoors and hook up the coax to all receivers in the house. Then, attach the coax to the TVs and you are ready to point the satellite dish.
Press the "Action" button and then the "Guide" button. This will take you to a screen that has a selection for set up. Click the "Set up" button. This will take you to a screen with installation on the screen. Click on "Installation." This takes you to the screen where the signal strength is measured.
Click the button for "Position" and a pop up box will open. Enter your zip code and this will give you another box that will tell you the proper alignment for your location. Write down the directions to use when moving the satellite dish.
Arrow over and go back to the screen with the satellite signal displayed. Go to the satellite dish and move the dish slightly checking the signal each time you move the dish. Watch the side marker in the instructions you wrote down.
Tighten the bolts on the dish after the signal is strong. Check all TV and receivers to make sure they have a strong signal.