Opening a 1992 Buick Century Hood with a Broken Cable
The hood release cable snapped. Here's how to pop it on a 1992 Buick Century (and most 1990s GM W-body cars).
- Locate the secondary release: On the driver's side, behind the front fender liner (inside the wheel well). Feel for a small metal lever or cable end protruding.
- Pull the lever toward you until you hear the hood pop (latch releases).
- Lift the hood and secure with the prop rod.
- If the cable is fully severed / lever inaccessible:
- Remove the plastic splash shield under the front bumper (usually 4–6 push-clips + 2 bolts).
- Reach up behind the radiator support to the hood latch assembly.
- Manually pull the latch release lever with pliers or a long screwdriver.
- Hood pops. Lift, prop, replace splash shield.
Safety Notes
- Wear gloves—sharp metal edges behind the bumper.
- Engine may be hot. Watch forearms.
- Replace the cable ASAP (part ~$15–25, 30-min job). Driving without a functional hood latch is a safety hazard.
GM used this cable-routed-to-wheel-well design on Cutlass, Grand Prix, Regal, Lumina, and others of the era. Same fix applies.