Arts >> Dance >> Swing Dance

FM Broadcast Standard: 100% Modulation Equals ±75 kHz Deviation

In FM radio broadcasting, modulation depth is measured by frequency deviation—the distance the carrier wave swings from its center frequency. The industry standard defines 100% modulation as ±75 kHz peak deviation.

What This Means Practically

If a station transmits at 100.0 MHz, 100% modulation means the instantaneous frequency varies between 99.925 MHz and 100.075 MHz in response to the audio signal. This ±75 kHz window provides the dynamic range for high-fidelity stereo audio while preventing adjacent-channel interference.

Why 75 kHz?

The figure was established by the FCC (and adopted internationally) as the optimal balance between audio quality and spectral efficiency. FM's wider deviation compared to AM (which uses amplitude variation) is key to its superior signal-to-noise ratio and resistance to static. Over-modulation (>75 kHz) causes splatter into neighboring frequencies; under-modulation wastes the system's noise-immunity potential.

Monitoring Compliance

Broadcasters use modulation monitors to ensure peaks don't exceed ±75 kHz. Modern processors automatically limit deviation while maximizing perceived loudness—keeping the signal legal and competitive on the dial.

Swing Dance

Related Categories