How to Remove a Door on a 1993 Plymouth Sundance
Front Door Removal
- Open the door.
- Remove bolt attaching check strap hook to door; detach hook from body.
- Remove two bolts from door hinge cover.
- Loosen (½ turn, do not remove) body nuts below door hinge.
- Support door with safety stand/jack.
- Remove nuts attaching door to hinges; remove door.
Rear Door Removal
- Open rear door; pull weatherstrip seal from body opening.
- Remove nuts attaching door check; unhook check from body.
- Remove bolt attaching childproof lock actuator rod to door lock rod; disengage rod.
- Remove bolt attaching pull-up cup bracket to door.
- Pull up rear edge of window guide to disengage from channel; raise window fully.
- Unscrew Phillips-head screw on upper door trim panel; pry off and remove panel.
- Apply 3-inch masking tape over trim retaining nut in window run channel (protection).
- Remove retaining nuts; disengage weatherstrip retaining clip from upper door corner.
- Support door with wooden block; remove lower attaching bolts.
- Raise door and remove from vehicle.
Safety Note: Always support the door securely before removing hinge bolts.