1. Gather the necessary tools. You will need a Phillips head screwdriver, a flat head screwdriver, and a trim removal tool.
2. Remove the trim piece around the radio. Use the flat head screwdriver to pry up the trim piece starting from the bottom. Be careful not to damage the trim piece.
3. Remove the four Phillips head screws that hold the radio in place.
4. Disconnect the wiring harness from the back of the radio. There are two wiring harnesses, one for power and ground, and one for the speakers.
5. Remove the radio from the dash by pulling it straight out. Be careful not to drop the radio.
6. To reinstall the radio, simply reverse the steps above.