The most critical step is choosing the wood. Traditionally:
The cut wood must be air-dried slowly for several years—often 5 to 10+ years—to stabilize moisture content and develop acoustic properties. Kiln drying is avoided for high-quality instruments.
The top and back are carved to precise graduated thicknesses (arching) using gouges, planes, and scrapers. This arching determines the instrument's structural integrity and voice. The f-holes are cut into the top plate.
Thin maple ribs are bent to shape on a hot bending iron and glued to the corner and end blocks on the mold.
The carved top and back are glued to the rib structure. The purfling (decorative inlay) is set into a channel around the edges of the top and back to prevent cracks.
The neck and scroll are carved from a single piece of maple. The pegbox is drilled and the scroll volute is shaped.
A ground coat seals the wood, followed by multiple layers of oil or spirit varnish. This protects the wood and enhances aesthetics. The varnish recipe and application greatly affect the sound.
Final steps include fitting the fingerboard, bridge, soundpost, bass bar, tailpiece, endpin, and pegs. The bridge and soundpost placement are crucial for tone adjustment.
Creating a fine cello takes 200–300+ hours of skilled labor over many months.