Can a Snapped Guitar Tuning Peg Be Repaired?
Yes, usually. Repair depends on break location and peg type.
Common Scenarios & Fixes
- Peg shaft snapped (headstock intact): Replace the individual tuning machine ($10–50 + labor). Match gear ratio (14:1, 18:1), post height, mounting style (sealed vs. open).
- Headstock cracked at peg hole: Glue + clamp + reinforcement (dowels, splines, carbon fiber). Then replace peg. Requires luthier; $150–400+.
- Vintage / slotted headstock (peg through wood): May need bushing (brass sleeve) glued into repaired hole, then new peg.
- Locking tuners (Floyd Rose, Sperzel): Replace whole unit; often sold in sets.
DIY vs. Pro
- DIY: Only if peg shaft broke cleanly, headstock solid, you have tools (reamer, wrench, feeler gauges). Risk: misalignment → tuning instability.
- Luthier/Tech: Guarantees alignment, finish touch-up, structural integrity. Worth it for valued instruments.
Prevention
- Don't over-tighten strings.
- Use string winders gently.
- Check peg screws periodically.
- Case the guitar; avoid headstock impacts.