Put on a mask and protective gloves.
Add white portland cement with binder in a 1:1 ratio in a 5-gallon bucket. Use paper fiber insulation as binder, paper strips or fibermesh, a product designed specifically for use with concrete to provide strength and prevent cracking. Artists' preferences vary, so experiment.
Add a concrete latex or joint compound and water in a 1:4 ratio; the latex helps to give the mixture a smooth, clay-like consistency.
Mix with your hands until the cement sculpting base reaches the consistency of modeling clay.
Construct the armature for the sculpture. Use wire, PVC or metal rods; do not use wood as it will absorb the moisture from the cement and rot, causing the structure to fail at a later date. When constructing the armature, build the dimensions to accommodate the thickness of the cement.
Add the white cement sculpting base to the armature. Start at the base of the sculpture and build upward. If the cement does not adhere to the armature or slumps, the water content is too high. Add more binder from until the cement remains firm but workable.
Shape the cement while wet. The wet cement sculpting base will mold like clay. Use the same tools you would use to work with modeling clay.
Wrap the cement sculpture in plastic to help retain moisture when you are not working. Depending on the moisture content of the cement sculpting mixture, the sculpture may retain its pliability for two or three days.
Shape and polish the statue after the cement sculpting base begins to dry. Use sandpaper, steel wool, rotary cutting and grinding tools or other stone-carving tools to smooth the cement and create fine details.
Allow the cement to cure for three days to a week, depending on the total moisture content of the cement base. The longer you allow the cement to cure, the better.
Use a concrete sealant to cover the cement sculpture to prevent the sculpture from cracking due to changes in temperature or humidity over its lifetime. If you plan to display the sculpture outdoors, this step is imperative.