Hooking up speakers? The standard convention for zip-cord (two-conductor) speaker wire is straightforward—once you know what to look for.
Electrically, reversing both speakers (swapping + and – on each) yields the same result—the signal stays in phase. But reverse one speaker, and you get phase cancellation: thin bass, vague imaging, a hollow center. The golden rule: wire both speakers identically.
If the wire isn't marked or you're unsure:
Takes ten seconds, saves hours of troubleshooting.
Pro tip: Use banana plugs or spade connectors for a secure, repeatable connection. And label your wires at both ends—future you will thank present you.