Determine the type of MIDI interface your MIDI keyboard uses by looking at the back panel of your keyboard. Most modern MIDI devices feature both USB interfaces, for controlling virtual instruments on computers, and unique MIDI ports for traditional rack synthesizers. If you are using an older MIDI keyboard with only a MIDI OUT port to control a virtual synthesizer, you will require a MIDI to USB conversion box, such as those produced by M-AUDIO, MOTU and Cakewalk, available from Internet and retail outlets. (See Resources)
Connect your MIDI keyboard to your sound source by USB or from the MIDI out of your keyboard to the MIDI in of your rack synthesizer. A USB connection handles both MIDI in and MIDI out data through a single line, whereas a unique MIDI port requires individual in and out connections.
Power up your sound source and MIDI controller device. While all MIDI devices are designed for hot swap, it is always best to make your connections with all devices powered down to assure device recognition.
Set the MIDI receive channel on your sound source by following the directions included in the device documentation. MIDI sends data on up to 16 simultaneous channels, and some MIDI devices can produce 16 unique patches, or sounds, at once, while some only produce one sound. Set the receive channel to either 1 or All for instruments playing melodies and channel 10 for drums or percussion.
Set the MIDI send channel of your controller keyboard to the MIDI receive channel of your sound source by following documentation included with your MIDI keyboard. Some MIDI controllers have a channel option built into the interface, whereas others list MIDI functions above the black and white keys of the keyboard. In the case of the latter, simply press the "Shift" or "Function" key, depress the key assigned to "Program Channel" and select 01, 10 or Any from the labeled keys.