Power the unit on by flicking the power switch on the back left of the unit. Remove the front panel of the console's case to allow you to slide out the built-in keyboard. Wait a few seconds for the unit to boot up.
Plug your iPod device into the iPod dock built in to the iDJ2's screen. Click on the Load button at the bottom of the iDJ2 screen. This will load up your iPod's song library.
Scroll down to the "Playlist" library using the knob underneath the iDJ2 screen. Push down on the knob to select "Playlist" from the menu. This will load up a list of all the available songs on your iPod.
Scroll down the list of songs until you find the first song you want to mix with. Push down on the knob to select the track.
Push the "To A" button in the menu to assign the track to the left hand deck.
Click on the "Back" button and scroll down to find the next song you want to mix with the track you just loaded into Deck A. Select the song and then click "To B" to assign the track to the right hand deck.
Slide the crossfader all the way to the left hand side and push the "Play" button underneath Deck A. You will hear your selected track playing. When you want to mix in the song on Deck B, press the "Play" button underneath Deck B and slide your crossfader slowly all the way to the right hand side. If you want to hear both tracks mixed and playing simultaneously, leave the crossfader in the center.
Load a new song in Deck A while the song in Deck B is playing and the crossfader is all the way to the right. When wanted, change the song on Deck B as the crossfader is all the way to the left, and repeat the process to keep the mix going indefinitely Use the the three EQ knobs on top of each deck to adjust the bass, mid and treble levels of each song.