Arts >> Art >> Other Art

How to Tape Double Flare Plugs

Double flare plugs fit into stretched piercings. The term double flare refers to the fact that there is a lip on either side of the jewelry. These two lips, or flares, hold the jewelry in place. When using double flare plugs to stretch a piercing, the tape wrapping method creates a gradual stretch. When performed properly, this type of stretch is less likely to cause long term damage to the piercing. Taping double flare plugs requires medical or Teflon tape to add layers of thickness to the jewelry.

Things You'll Need

  • Teflon or surgical tape
  • Soapy water
Show More

Instructions

    • 1

      Clean the plug thoroughly. It is not necessary to use an autoclave sterilizer to clean plugs for stretches; cleaning the plugs thoroughly in hot, soapy water is sufficient. Allow the plugs to dry thoroughly.

    • 2

      Unwind a small amount of tape from the tape roll. Center this tape strip in the "saddle" area between the two flares of the jewelry. Cut the edges of the tape so that it fits securely.

    • 3

      Wind the tape around the plug, pulling taut so there are no wrinkles or air bubbles. Wrap one or two layers of tape, then cut. The jewelry is ready for use. Add additional layers of tape when you are ready to stretch to the next size.

+:
+:

Other Art

Related Categories