* Graphite powder
* Epoxy resin
* Hardener
* Mixing container
* Stirring stick
* Disposable gloves
Instructions:
1. Put on your disposable gloves.
2. In a mixing container, combine the graphite powder and epoxy resin in a 1:1 ratio.
3. Mix the two ingredients together thoroughly until a smooth, uniform consistency is achieved.
4. Add the hardener to the mixture and stir again until everything is well combined.
5. The graphite resin glue is now ready to use. Apply it to the desired surface and allow it to cure for the recommended amount of time.
Notes:
* The graphite resin glue will cure to a hard, durable finish.
* The glue is water-resistant, but it is not recommended for use in areas that will be exposed to extreme heat or cold.
* The glue may stain some surfaces, so it is important to test it on a small area before using it on a large scale.