Put on protective goggles. Remove the blade from the kit. Wrap up the blade using four layers of masking tape. Combine epoxy resin and put it on the tang of the blade. Apply resin also on the tang channels, which are on the interior of the handle halves.
Allow the epoxy to solidify. Utilize an electric disk grinder and carve the form you wish the handle to have. Feel free to utilize a design of your own making or to adhere to the pattern that came with the kit.
Use a sanding block to sand the handle until it's smooth. Put on varnishing oil. Be certain to apply the substance evenly. Let the oil dry completely. This will give the knife a polished finish.