Arts >> Theater >> Stage Productions

How to Wire a Peavey TriFlex Crossover

The Peavy TriFlex speaker system is a portable PA system with two speakers and a subwoofer. An amplifier is attached to the subwoofer. The amplifier includes a built-in crossover signal for high-pass frequency outputs, specifically 120 Hz and up. The crossover only works when either powered full-range speakers (active) or passive full-range speakers and an amplifier are set up for high-pass frequency output.

Things You'll Need

  • 2 XLR speaker cables
Show More

Instructions

    • 1

      Insert one end of an XLR speaker cable into the "Right Hi Pass Out" port on the Peavey TriFlex amplifier.

    • 2

      Insert the other end of the cable into the input jack of the right powered speaker or the "Right Input" jack of the amplifier (if you are using passive speakers).

    • 3

      Repeat steps 1 and 2 for the "Left Hi Pass Out." Continue to step 4 if you are using passive speakers.

    • 4

      Connect a second set of XLR cables from the left and right output jacks on the amplifier to the input jacks on the left and right speaker.

+:
+:

Stage Productions

Related Categories