Removing the Radio from a 2001 Pontiac Bonneville
Tools: 7 mm socket, 9/32″ socket, panel tool, Torx T15/T20 (optional).
- Disconnect negative battery terminal (wait 2 min for airbag capacitor).
- Remove center console trim: Pry off cupholder insert; remove 2 screws (7 mm) at front. Lift console trim, unplug 12V outlet, set aside.
- Remove radio bezel: Pry gently from bottom; release clips. Unplug hazard switch, defogger, traction control connectors.
- Remove radio: 4 × 7 mm bolts (2 top, 2 bottom). Slide unit out.
- Disconnect harnesses: Main connector (power/speakers), antenna coax, optional OnStar/XM connectors.
- Install aftermarket: Use GMOS-LAN-02 harness adapter (retains chimes, OnStar, steering controls) and antenna adapter (40-GM10). Mount with dash kit (99-3303 or 95-3303).
Reassemble in reverse. Reconnect battery; radio may need VIN relearn (dealer/Tech2).