Removing the Factory Radio from a 2007 GMC Sierra Classic: 7mm Bolts and Trim Removal
Tools: 7 mm socket, Phillips screwdriver, trim removal tool.
- Disconnect negative battery cable.
- Remove the instrument panel bezel: Pry from the lower edge (driver's side first). Release all clips; unplug connectors for switches (4WD, traction, etc.).
- Remove the radio bolts: Two 7 mm bolts at the bottom of the radio cavity (accessible through the bezel opening).
- Slide radio out ~6 inches. Disconnect the main harness, antenna, and (if equipped) OnStar/XM connectors.
- Remove the radio.
Installation is reverse. If installing an aftermarket unit, use a dash kit (Metra 99‑3303) and harness adapter (Metra 70‑2103 for Bose, 70‑1784 for non‑Bose). Reconnect battery and test.