Arts >> Music >> Recording Music

Locating Radio Antenna Wire for CD Player Install in 1997 Mercury Mountaineer

Most Likely Locations

  1. Behind Factory Radio: Remove radio (DIN keys). Look for a single thick wire (usually blue or blue/white) in the main harness labeled “ANT,” “ANTENNA,” or “PWR ANT.” This is the antenna signal lead.
  2. Dedicated Antenna Port: Some models have a separate round coaxial connector (Motorola type) at the rear of the radio cavity.
  3. Behind Glove Box: In some trims, the antenna lead runs up the A-pillar and connects behind the glove box area. Remove glove box (squeeze sides) to access.

Connection

Aftermarket head units use a Motorola plug (male). If your vehicle has the coaxial port, plug directly. If it’s a bare wire in the harness, use the supplied adapter (bare wire → Motorola) or crimp/solder.

Always verify with a multimeter: antenna lead shows ~0V DC, continuity to mast.

Recording Music

Related Categories