How do you remove the radio on an 1991 Eldorado radio?

To remove the radio on a 1991 Eldorado, you will need the following tools:

* A Phillips head screwdriver

* A flat head screwdriver

* A socket wrench with a 7mm socket

1. Disconnect the battery. This will prevent any electrical shocks from occurring while you are working on the radio.

2. Remove the four screws that hold the radio faceplate in place. These screws are located on the top and bottom of the faceplate.

3. Once the faceplate is removed, you will see the radio chassis. There are four more screws that hold the radio chassis in place. Remove these screws.

4. Once the radio chassis is removed, you will need to disconnect the wiring harness. There are two connectors on the back of the radio. One is the power connector and the other is the speaker connector. Disconnect both of these connectors.

5. Once the wiring harness is disconnected, you can remove the radio from the dash.

To reinstall the radio, simply follow these steps in reverse order.