Cordless Drill Amperage Isn't a Fixed Number — It Depends on Battery, Voltage, and Load
You won't find a single "amperage rating" printed on a cordless drill because the current draw is variable, not constant. Unlike a corded tool plugged into a steady 120V outlet, a cordless drill's amperage fluctuates based on several factors:
Why It Varies
- Battery-Powered: The drill draws from a DC battery pack. The current (amps) depends on the battery's capacity (amp-hours, Ah) and its voltage (V).
- Variable Load: Drilling into soft pine requires far less current than boring through hardwood, steel, or concrete. The motor pulls only what it needs to overcome resistance.
- Battery Chemistry: Ni-Cd, Ni-MH, and Li-ion batteries have different discharge curves and internal resistances, affecting available current under load.
What to Check Instead
- Battery Amp-Hours (Ah): This indicates capacity—how long the battery can deliver a given current. A 2.0 Ah battery can theoretically supply 2 amps for 1 hour (or 1 amp for 2 hours).
- Battery Voltage (V): Common platforms are 12V, 18V/20V Max, 36V, etc. Higher voltage generally means more power potential.
- Real-World Draw: Under light load, a 12V/2Ah drill might draw ~2A. Under heavy load (large auger bit in hardwood), the same drill could pull 5A–10A+ until the battery's protection circuit kicks in or voltage sags.
Bottom Line: Consult your specific model's manual for maximum current draw specs if you're sizing a battery or troubleshooting. For general use, the Ah rating and voltage are the meaningful numbers.