How to Build a Simple DIY Fog Horn
A basic pneumatic fog horn uses compressed air to drive a siren or reed. For educational/demonstration purposes only—check local noise ordinances.
Materials
- Large metal/plastic funnel (horn flare)
- High-pressure hose (rated >100 PSI)
- Portable air tank / compressor (10+ gal, 90–120 PSI)
- Flow-control valve (ball valve or needle valve)
- Siren unit / reed horn / whistle (commercial fog horn head or DIY reed)
- Two wood pieces (base + siren mount)
- Drill, screws, wrenches, Teflon tape
- Hearing protection (MANDATORY)
Assembly
- Mount siren on one wood piece, aimed horizontally.
- Position funnel on second piece, facing siren at 6–12" distance (acts as acoustic coupler).
- Connect air tank → valve → hose → siren inlet. Seal all joints with Teflon tape.
- Secure both wood pieces to a stable base (plywood, pallet).
- Test in open area – Open valve gradually. Siren activates via air pressure.
- Adjust valve for tone/volume. Funnel length/diameter affects resonance.
Safety & Legal
- Hearing damage risk: >120 dB at close range. Wear ANSI-rated protection.
- Noise ordinances: Most municipalities restrict >70 dB daytime / >55 dB nighttime.
- Pressure safety: Use rated components; never exceed tank/hose limits.
- Marine use: Real fog horns follow IMO COLREGs (sound patterns, audibility range). This DIY version is NOT compliant.
Better alternative: Buy a coast guard-approved electric horn ($30–$80) for actual boating.