Acoustic-Electric Guitar Cable: Standard 1/4" Instrument Cable Required
Yes—you need a standard 1/4-inch (6.35mm) instrument cable (TS: tip-sleeve) to connect your acoustic-electric guitar to an amp, PA, audio interface, or pedalboard. No special proprietary cable required.
What to Look For
- Connector: 1/4" TS (mono) plugs both ends. Gold-plated tips resist corrosion.
- Shielding: Braided > spiral > foil. Rejects 60-cycle hum, RF interference.
- Capacitance: Low capacitance (<30 pF/ft) preserves high frequencies — critical for piezo pickups' brittle top end.
- Length: 10 ft (practice), 15–20 ft (stage), 25 ft max (capacitance accumulates).
- Durability: Reinforced strain relief at plugs, flexible jacket (PVC or TPE).
- Coiled vs. Straight: Coiled reduces tangling for active players; straight lays flatter.
What You Don't Need
- XLR cables (for microphones, DI boxes)
- Speaker cables (thicker gauge, no shielding — dangerous for instrument level)
- TRS (stereo) cables — unless using active stereo pickup system (rare)
- Brand-specific "acoustic" cables — marketing, not engineering
Reputable Brands
Mogami, George L's, Evidence Audio, D'Addario Planet Waves, Fender, Ernie Ball, Hosa (budget). Spend $20–$50 for a cable that lasts years, not months.
Pro Tip: Carry a spare. Cables fail at the worst moment. Velcro cable ties keep them tamed.