Fixing Radio Buzz from Under-Cabinet LED Lights
A buzzing radio when low-voltage under-cabinet lights switch on signals electromagnetic interference (EMI). Here's a troubleshooting sequence, ranked by likelihood:
- Transformer Noise — The #1 Culprit: Cheap or failing magnetic/electronic transformers (drivers) for LED/halogen lights radiate high-frequency hash. Fix: Replace with a high-quality, FCC-compliant Class 2 driver (e.g., Lutron, Mean Well) rated for your load.
- Wiring as Antenna: Long low-voltage wires act as antennas. Fix: Use twisted-pair wire, keep runs short, route away from the radio/antenna. Run in metal conduit if possible.
- Grounding Issues: Ensure the transformer's ground is solid. The radio needs a good ground (antenna ground or chassis ground).
- Proximity: Move the radio or its antenna away from the lights/transformer. Even a few feet helps.
- Dimmer/Switch Interference: If lights are dimmed, leading-edge TRIAC dimmers create massive EMI. Fix: Use trailing-edge (ELV) or 0-10V/PWM dimmers designed for LEDs.
- Radio Power Supply: Try powering the radio from a different circuit or a battery to isolate conducted noise.
- Ferrite Chokes: Snap-on ferrite cores on the light's low-voltage wires and radio power cord can suppress high-frequency noise.
First Test: Unplug the light transformer. If the buzz stops, the transformer or its wiring is the source.