* A Peavey guitar
* A set of new strings
* A string winder
* A pair of wire cutters
2. Loosen the old strings. Using the string winder, turn the tuning pegs counterclockwise until the strings are completely loose.
3. Remove the old strings. Once the strings are loose, you can use the wire cutters to snip them off at the ball end.
4. Insert the new strings. Start by sliding the ball end of the new string through the hole in the bridge. Then, pull the string up over the nut and the headstock.
5. Wind the strings onto the tuning pegs. Using the string winder, turn the tuning pegs clockwise until the strings are tight.
6. Tune the guitar. Use a tuner to tune the guitar to the desired pitch.
7. Stretch the strings. Once the guitar is tuned, you should stretch the strings by pulling them up and down a few times. This will help to set the intonation and prevent the strings from going out of tune.
8. Enjoy your newly strung guitar!