How to Dry and Repair a Wet Guitar — Step-by-Step Recovery
Water + guitar = emergency. Act fast, dry slow, assess honestly.
- Blot surface: Soft cloth; press, don't rub (protects finish).
- Remove strings: Relieves neck tension; prevents warping.
- Open case: Maximum air circulation; prevents mold.
- Place in stable environment: 68–75°F (20–24°C), 40–50% RH. NO direct heat (radiators, hair dryer high, sunlight) — causes checking, glue failure, warp.
- Wait days to weeks until fully dry (verify with hygrometer in case).
- Assess damage: Finish clouding/blushing, neck bow/relief changes, fret sprout, electronics corrosion, brace separation, mold inside.
- Pro repair if: Finish cracked, neck warped, electronics dead, mold inside, structural cracks.
Prevention (The Real Fix)
- Climate-controlled case (Boveda packs, D'Addario Humidipak)
- Silica gel packs in case (replace monthly)
- Never leave in car/trunk — temperature/humidity extremes
- Wipe down after every session (sweat = acid + water)
A wet guitar can often be saved if dried slowly and assessed by a luthier. Rush the dry, and you'll ruin it.