Arts >> Music >> Music Basics

Tuning a Guitar to Drop D for Metal: Step-by-Step Guide and Why It's the Standard

One-Finger Power Chords and a Lower Range

Drop D tuning (D–A–D–G–B–E) is the most common "metal" tuning—low E dropped a whole step to D, enabling one-finger power chords on the bottom three strings.

Step-by-Step

  1. Start in Standard (E–A–D–G–B–E) — tune accurately with a chromatic tuner.
  2. Drop the 6th String: Turn the low E tuning peg counter-clockwise (loosen) until the tuner reads D2 (one octave below 4th string D). Pluck continuously while turning.
  3. Verify Octave: Play 6th string open (D) and 4th string open (D) — they should match an octave apart.
  4. Check Intonation: Fret 6th string at 12th fret — should read D (octave harmonic). Adjust bridge saddle if sharp/flat.
  5. Optional: Drop C (C–G–C–F–A–D) — drop all strings a whole step from Drop D. Requires heavier gauge strings (e.g., .011–.056) to maintain tension.

Why Drop D?

Tip: Use a tuner with "Drop D" mode or chromatic. Stretch strings after tuning.

Music Basics

Related Categories