- Aftermarket amplifier
- Speaker wire
- Wire strippers
- Crimp connectors
- Soldering iron (optional)
- Heat shrink tubing (optional)
Instructions:
1. Disconnect the negative battery terminal to avoid any electrical accidents.
2. Remove the factory speakers from the Cherokee's doors or sound bar.
3. Connect the positive terminal of the aftermarket amplifier to the positive speaker terminal on each speaker using speaker wire.
4. Connect the negative terminal of the aftermarket amplifier to the negative speaker terminal on each speaker using speaker wire.
5. If you prefer a more secure connection, you can solder the speaker wires to the speaker terminals and use heat shrink tubing to insulate the connections.
6. Run the speaker wires from the speakers to the location of the amplifier.
7. Connect the speaker wires to the appropriate speaker output terminals on the amplifier.
8. Securely mount the amplifier in the desired location.
9. Reconnect the negative battery terminal.
10. Test the speakers to ensure they are working properly.
Note: The specific steps and connections may vary depending on the specific amplifier and speaker models you are using. Always refer to the instructions provided with your amplifier for accurate installation instructions.