You're twisting knobs, scanning buttons, and AM is nowhere to be found. Before you assume the radio's broken, understand: not every radio receives both bands. Here's the breakdown.
Most home stereos, clock radios, and portable units from the last 40 years are dual-band. Look for a physical switch or button labeled BAND, FM/AM, or MODE. Toggle it. If the display changes from "FM" to "AM" (or "MW" for Medium Wave), you're in business.
Some budget portables, car head units, and specialty tuners are FM-only by design. No switch exists because the AM circuitry isn't there. However, some FM-only receivers have an AM antenna terminal on the back—usually a screw terminal labeled "AM ANT" or "LOOP." If yours does:
If there's no band selector and no AM antenna terminal, the radio physically cannot receive AM signals. No workaround exists short of buying a different radio.
AM signals travel farther at night but suffer more interference from electronics. For daytime listening, keep the antenna away from computers, LED lights, and switching power supplies.