How to Pair Advent AW 400 Wireless Stereo Speakers
Advent AW 400 Pairing Instructions:
- Plug both speakers into power outlets.
- On the primary speaker (usually the one with controls), locate the Pairing button on the rear panel.
- Press and hold the Pairing button until the status LED flashes blue and red rapidly (pairing mode).
- On your source device (phone, tablet, computer), open Bluetooth settings and scan.
- Select "Advent AW 400" (or similar) from the device list.
- Once connected, the speaker emits a confirmation tone and the LED turns solid blue.
- Repeat steps 2–6 for the second speaker if stereo pairing is supported (some models pair automatically after the first).
Troubleshooting: Ensure no other Bluetooth devices are interfering; keep speakers within 10m of source; update firmware via Advent app if available.