Getting HDMI Audio to Your Receiver When Using the TV as Source (ARC/eARC)
Modern TVs can send audio “backwards” to a receiver via HDMI ARC (Audio Return Channel) or eARC (Enhanced ARC). Here’s how to set it up.
Setup Steps
- Check compatibility: TV, receiver, and HDMI cable must support ARC or eARC (HDMI 2.1).
- Connect: TV’s HDMI ARC/eARC port (usually labeled) → Receiver’s HDMI ARC/eARC input using a High-Speed HDMI cable (48 Gbps for eARC).
- Enable on TV: Settings → Sound → Audio Output → HDMI ARC / eARC / External Speaker ON. Disable TV speakers.
- Enable on Receiver: Input select → TV / ARC. Set HDMI Control (CEC) ON.
- Test: Play a TV app (Netflix, etc.); audio should route to receiver speakers.
Troubleshooting
- Power-cycle both devices.
- Try a different certified HDMI cable.
- Update firmware (TV & receiver).
- If no ARC: use optical (Toslink) or analog RCA from TV to receiver.
ARC carries compressed 5.1; eARC carries uncompressed Atmos/DTS:X.