- A screwdriver
- A hammer
- A putty knife
- A pry bar
- Safety goggles
Step 1: Disconnect the power supply
Before you begin any work, make sure that the TV is unplugged from the power outlet. This will help to prevent any electrical shock injuries.
Step 2: Remove the screws
Use the screwdriver to remove the screws that hold the turntable in place. There may be screws on both the top and bottom of the turntable.
Step 3: Pry the turntable out of the cabinet
Once the screws are removed, you can use the pry bar to pry the turntable out of the cabinet. Be careful not to damage the cabinet or the turntable.
Step 4: Remove the old mounting hardware
Once the turntable is removed, you will need to remove the old mounting hardware from the cabinet. This may include nails, screws, or brackets.
Step 5: Clean the cabinet
Use the putty knife to scrape away any old glue or adhesive from the cabinet. Then, wipe the cabinet clean with a damp cloth.
Step 6: Install the new turntable
Place the new turntable in the cabinet and align it with the mounting holes. Insert the screws and tighten them until the turntable is secure.
Step 7: Reconnect the power supply
Plug the TV back into the power outlet and turn it on. Make sure that the turntable is working properly before you enjoy your TV.