Parts Needed to Build a Telecaster-Style Guitar: Complete Checklist
Building a Fender Telecaster-style guitar requires these components:
1. Body
- Wood: Alder (classic), Ash, Pine, Poplar, Mahogany.
- Routing: Bridge pickup, neck pickup, control cavity, ferrule holes (string-through).
- Finish: Nitro, poly, oil, raw.
2. Neck
- Wood: Maple (standard), Mahogany, Rosewood fretboard (glued).
- Profile: C, U, V, Modern C.
- Scale: 25.5" (Fender), 24.75" (Gibson) — Tele = 25.5".
- Frets: 21 or 22; medium jumbo, narrow tall, stainless.
- Nut: Bone, Tusq, brass, roller.
- Tuners: Vintage Kluson, sealed locking (Gotoh, Schaller), 6-in-line.
3. Bridge
- 3-saddle vintage (brass/steel) — classic twang.
- 6-saddle modern — better intonation.
- String-through-body (ferrules) or top-load.
4. Pickups
- Bridge: Single-coil (Alnico 3/5, ~7kΩ) — bright, biting.
- Neck: Single-coil (Alnico 2/5, ~6kΩ) — warm, woody.
- Options: Noiseless, humbucker-sized, P-90, active.
5. Electronics
- Control plate: Volume (250k/500k), Tone (250k/500k), 3-way switch.
- Capacitor: 0.022µF, 0.047µF, 0.1µF (tone roll-off).
- Wiring: Cloth push-back, modern PVC.
6. Hardware
- Strap buttons (2), string ferrules (6), neck plate + screws (4), pickguard (1-ply/3-ply), jack cup.
7. Strings
- .009–.042 to .011–.049 (nickel, pure nickel, stainless).
Tools: Soldering iron, drill, router, fret files, radius gauges, setup tools. Kits available (Warmoth, Allparts, StewMac).