How do you sharpen reel-to-reel mower blades?

To sharpen reel mower blades on a reel-to-reel mower, follow these steps:

1. Remove the mower deck: Loosen the deck bolts and remove the mower deck from the mower.
2. Set the mower deck upside down: Place the mower deck upside down on a flat surface.
3. Locate the blade reel: The blade reel is the cylinder-shaped part that contains the mower blades.
4. Clean the blade reel: Remove any dirt, grass, or debris from the blade reel using a wire brush.
5. Place a grinding stone in the blade reel: Place a grinding stone or sharpening stone inside the blade reel, making sure that the stone is in contact with the mower blades.
6. Sharpen the blades: Turn the blade reel by hand while applying pressure on the grinding stone. Continue turning the reel and sharpening the blades until they are sharp.
7. Remove the grinding stone: Once the blades are sharpened, remove the grinding stone from the blade reel.
8. Reassemble the mower: Reassemble the mower deck and mower, and tighten the deck bolts securely.

Tips for sharpening reel-to-reel mower blades:

- Check the blade reel for any damage, such as cracks or bends, before sharpening the blades.

- Use a sharpening stone that is specifically designed for sharpening mower blades.

- Apply a light coat of oil to the mower blades after sharpening them to protect them from rust.

- Sharpen the mower blades regularly to maintain a clean, even cut.