- Teletone taps
- Hammer
- Awl or nail
Instructions:
1. Place the tap on the bottom of the shoe, in the desired location.
2. Use the awl or nail to make a small hole in the center of the tap.
3. Insert the nail or awl into the hole and hammer it into the shoe.
4. Continue hammering until the tap is securely attached.
5. Repeat steps 1-4 for each tap you want to attach.
Tips:
- Make sure to place the taps in an even pattern on the shoes.
- If the taps are too loose, they will make a rattling noise when you dance.
- If the taps are too tight, they will be difficult to remove.
- You can also use a drill to make the holes for the taps.