Note: It's recommended to consult the vehicle's owners manual and consult with car technician or someone with experience installing car audio systems before proceeding.
Diagram Legend (may vary based on specific car models):
- Red: Power
- Yellow: Permanent/Battery
- Black: GND (Ground)
- Blue: Antenna
- White: Left Front
- White/Black: Left Front (-)
- Gray: Right Front
- Gray/Black: Right Front (-)
- Green: Right Rear
- Green/Black: Right Rear (-)
- Violet: Left Rear
- Violet/Black: Left Rear (-)
*Diagram Instructions:*
Step 1: Disconnecting the Negative Terminal
A: Locate the negative (-) terminal on your vehicle's battery.
B: Disconnect the terminal. (Usually by loosening a bolt or quick-release connector).
Step 2: Connecting Wires To Radio:
C: Connect the RED power wire to the yellow wire coming from your vehicles radio harness.
D: Join the BLACK grounding wire to the black wire of the harness or the chassis ground
point of the vehicle.
E: Attach the Yellow permanent wire to the red (constant power) wire on the harness.
F: Link the BLUE wire for the radio antenna to your car's antenna connector.
Step 3: Connect Car Speakers
G: Connect the WHITE wire to the front left speaker’s positive (+) terminal.
H: Attach the WHITE/BLACK wire to the same speaker's negative (-) terminal.
I: Connect the GREY wire to the positive terminal of the right front speaker.
J: Attach the GREY/BLACK wire to the corresponding negative terminal.
K: Link the GREEN wire to the positive terminal of the right rear speaker.
L: Connect the GREEN/BLACK wire to its negative terminal.
M: Connect the VIOLET wire to the positive terminal of the left rear speaker.
N: Complete the connection by linking the VIOLET/BLACK wire to its negative terminal.
Step 4: Ensure Proper Wire connections
O: Double check all the connections you've made. Ensure there's no loose wiring and that all wires are appropriately insulated to avoid potential shorts.
Step 5: Reconnect Negative Battery Terminal
P: Once everything's in place, reconnect the negative terminal of your car battery.
Step 6: Test Radio and Speakers
Q: Turn on the car's ignition and test the radio and speakers to make sure they're functioning correctly.
Note: Remember to ensure the car radio's model number and specifications match your specific vehicle’s requirements for compatibility and proper operation. If unsure or facing difficulties, consulting with a professional auto electrician or audio installer is recommended.