Verifying GPU Seating: Check the Card's PCIe Connection, Not the Chips
To check if GPU chips (BGA packages) are properly seated, you typically inspect the card's connection to the motherboard, not the chips themselves (which are soldered). Here's the correct process:
- Power down & unplug the computer.
- Open the case and locate the graphics card.
- Remove the card: Unscrew retention bracket, release PCIe latch, pull straight out.
- Inspect the gold edge connector for dirt, corrosion, or damage. Clean with isopropyl alcohol and a lint-free cloth if needed.
- Check the PCIe slot for debris or bent pins.
- Reseat firmly: Align and press evenly until the latch clicks.
- Secure the bracket screw and reconnect power cables.
- Test: Power on and verify video output.
Note: The GPU die and memory chips are soldered (BGA) and cannot be "reseated" individually. If artifacts or crashes persist, the issue may be solder fatigue (reflow/reball) or component failure—requiring professional repair.