Arts >> Art >> Sculpture

Why Is a Hammer Face Knurled? Usually It Isn't.

Standard hammer faces are SMOOTH. A smooth face delivers **clean, controlled impact** without marring the workpiece (wood, drywall, finished metal).

Knurling** (cross-hatched texture) is for **grip surfaces** — screwdriver handles, pliers, knobs, machine shafts — **not striking faces**.

Rare Exceptions (Specialized Hammers)

  • Ball-Peen Hammer (Peening Face): The *rounded* end (ball) is sometimes **knurled/textured** to **grip cold metal** during peening (spreading/riveting) so the hammer doesn't slip off the rivet head.
  • Rubber Mallet (Some): Knurled rubber face for **non-slip striking** on slick tile/stone.
  • Bodywork / Planishing Hammers: Textured faces for specific metal-shaping textures.

Bottom Line

If your claw/ball-peen/framing hammer has a **knurled *flat* face**, it's either **worn/damaged** (mushroomed) or a **defective/novelty tool**. Resurface or replace. Smooth face = pro standard.

Sculpture

Related Categories