Proper Mounting Guidelines for Tubular Wire-Wound Resistors
Correct mounting ensures thermal performance, reliability, and safety for tubular wire-wound power resistors.
Mounting Orientation
- Horizontal preferred: Promotes natural convection cooling (heat rises)
- Vertical acceptable with adequate spacing; avoid if possible
Critical Requirements
- Airflow: Minimum 25mm clearance all sides; forced air for high-wattage
- Spacing: 1.5× body diameter between adjacent resistors
- Terminal Stress: No mechanical load on leads; use strain relief
- Secure Fixation: Vibration-resistant brackets/clips; ceramic insulators if chassis-mounted
- Insulation: Maintain creepage/clearance distances per voltage rating
- Thermal Interface: Thermal grease/pad if heatsink-mounted
Manufacturer Compliance
Always consult the specific datasheet. Derating curves, maximum surface temperature, and mounting hardware specs vary by model/manufacturer (e.g., Vishay, Ohmite, TE Connectivity).