How to Assemble a Rubbermaid Vertical Storage Shed: Complete Step-by-Step Guide
Before You Begin
- Location: Level surface (concrete, asphalt, or solid wood deck).
- Help required: Two people minimum.
- Preparation: Inventory all parts against the manual; read instructions completely before starting.
Tools Needed
- Power drill / electric screwdriver (essential)
- Rubber mallet
- Level
- Tape measure
- Ratchet/socket set
Step-by-Step Assembly
Step 1: Foundation
- Concrete or asphalt preferred. Wooden deck must support shed weight.
- For lawn/soft ground: build a concrete block or paver foundation first.
Step 2: Wall Panels
- Four panels: front, back, two sides.
- Lay front panel flat; attach side panels with provided screws.
- Stand assembly upright; attach back panel.
Step 3: Roof Assembly
- Two pieces: front and back roof panels.
- Join on ground, then lift and secure to wall tops.
Step 4: Door Installation
- Attach door frame to door panel on ground.
- Mount assembled door to front wall opening.
Step 5: Floor Installation
- Two panels: front and back.
- Join on ground, position inside shed, secure to walls.
Step 6: Accessories (Optional)
- Install shelves, hooks, or other included accessories as desired.
Step 7: Secure the Shed
- Anchor against wind: 2×4s secured to ground or shed anchor kits.
Pro Tips
- Follow steps in exact order—don't skip ahead.
- Use power tools to reduce fatigue.
- Check level at every stage.
- Contact Rubbermaid customer service if instructions are unclear.