Making Canvas Frames
Canvas frames are the starting point of any canvas artwork. They help determine the size of the painting, as well as giving the artist a stable canvas surface to paint on. The basics of making a canvas frame are relatively simple and can be used to make frames to suit almost any dimension required. Finished frames then have canvas stretched and stapled over them ready for painting: The finished painting is either kept and hung on the canvas frame or taken off the frame for professional framing or storage. Canvas frames can be reused if the painting is removed after completion.
- Lumber, 1-by-2 inches
- Miter saw
- Wood glue
- Corner clamps
- Corner brackets
- Screws
- Drill
- Sandpaper
Show More
Instructions
-
-
1
Cut the lumber into four 10-inch lengths, then miter the ends to a 45-degree angle with the miter saw. The length varies, depending on the size of the painting you are planning on creating.
-
2
Assemble the cut lumber planks into a square, joining the mitered ends to form right angles. Place a line of glue between each mitered joint, them clamp the corner clamps, and let it dry.
-
-
3
Place the corner brackets on the inside of each corner, then drill and screw them in place using ¾-inch screws. Give the frame a rough sand with the sandpaper to eliminate any snags. The canvas frame is now ready for use.