Materials Used to Make Masks: From Cloth to P3 Filtration
Mask materials determine protection level, comfort, and use case:
Everyday / Reusable
- Cloth: Cotton, polyester, silk — washable, reusable, variable filtration (10–70% depending on layers/weave)
Disposable Medical / General
- Paper: Basic disposable, minimal filtration
- Plastic (polypropylene/polyethylene): Surgical-style, fluid-resistant, ~60–80% particle filtration
Respirator Grade (Occupational/Healthcare)
- N95 (US standard): Non-woven polypropylene — filters ≥95% of 0.3μm particles; medical, construction, wildfire smoke
- P2 (AU/NZ standard): Non-woven polyethylene — filters ≥94%; industrial, healthcare equivalent to N95
- P3 (EU standard): Polytetrafluoroethylene (PTFE) — filters ≥99.95%; military, high-hazard industrial, pharmaceutical
Selection by Purpose
| Use Case | Recommended |
| Daily public wear | Cloth (3-layer) or surgical |
| Healthcare / high exposure | N95 / P2 / KN95 |
| Industrial dust/fume | P2 / P3 (fit-tested) |
| Chemical/biological hazard | P3 / powered air-purifying (PAPR) |
Material choice matches hazard level. Fit matters as much as filter—seal check every donning.