Arts >> Theater >> Puppet Shows

Locating the Blinker Relay in a 1990 Plymouth Sundance: Step-by-Step Guide

The flasher/turn-signal relay on a 1990 Plymouth Sundance (and Dodge Shadow, Chrysler LeBaron twins) is typically located:

  1. Open hood; locate fuse/relay block on driver's side fenderwell (black plastic box, ~4×6 inches).
  2. Remove cover. The relay is a small cylindrical or rectangular plug-in unit (often silver/black, 2–3 blades).
  3. Look for labels: "FLASHER," "TURN," "TS," or a turn-signal icon.
  4. If not there: check under-dash fuse panel (left of steering column, behind kick panel).
  5. Some models use a combination flasher/hazard module — larger, square, plugged into the same block.

Test: Turn on hazard lights; feel/hear the relay click. That's the unit. Replace with same part number (e.g., Standard Motor Products RL-44, Grote 44890, or OEM 4609001).

Note: Wiring diagrams vary by trim (base, RS, Turbo). Consult a Haynes/Chilton manual for your exact VIN.

Puppet Shows

Related Categories