Arts >> Theater >> Plays

Action Replay: Game Works Alone, Fails With Cartridge Inserted—Diagnosis

If a game runs normally without the Action Replay (AR) but fails with it inserted, the AR is the failure point.

Diagnostic Checklist

  1. AR Firmware: Update via manufacturer PC software (Datel/Codejunkies site). Old firmware rejects newer game headers.
  2. Game/AR Region Match: NTSC AR + PAL game (or vice versa) causes boot failure.
  3. Cartridge Contacts: Clean both game pins and AR slot with 99% isopropyl + lint-free cloth. Bent pins on AR are common.
  4. AR Mode Switch: Some ARs have a physical "Game/Code" switch—must be on "Game" for passthrough.
  5. Code Conflict: Pre-loaded cheats may crash specific games. Format AR memory (hold A+B+Start on boot) to wipe codes.
  6. Game Anti-Cheat: Some titles (esp. later DS/3DS) detect AR and refuse boot.
  7. Power Draw: AR + game cartridge may exceed slot current limit (esp. on worn consoles). Try official power adapter.

Isolation Test

  1. Boot AR alone → should show main menu.
  2. Insert game → if freeze/crash, AR is defective or incompatible.
  3. Test another game on same AR.

If AR menu works but no game boots with it, the AR's passthrough circuitry is likely damaged. Replace unit.

Plays

Related Categories