Arts >> Music >> Recording Music

Best Practices for Recording Acoustic-Electric Guitar: A Step-by-Step Guide

Setup Essentials

  1. Choose a quiet room with minimal ambient noise and reflective surfaces. A treated space or a room with soft furnishings helps capture a clean, focused guitar sound.
  2. Position the microphone 12–18 inches from the guitar. For a condenser mic, aim at the 12th fret or slightly toward the sound hole for balance; for a dynamic mic, angle it slightly off-axis to reduce proximity effect and harshness.
  3. Use a high-quality cable to connect the microphone to your audio interface or preamp. This minimizes interference and signal loss.
  4. Set recording levels so peaks hit around -12 dB to -6 dB. This leaves headroom for dynamic passages while keeping the noise floor low.
  5. Record a test take and listen critically for balance, string noise, and room tone before committing to a full performance.

Tips for Better Results

Additional Advice for a Great Source Sound

Remember: the best recording starts with a great performance on a well-maintained instrument in a decent room. Technique and preparation outweigh gear every time.

Recording Music

Related Categories