Recording Bass Guitar via Alesis MicLink (XLR-to-USB): Works, But Dedicated Interface Is Better
Yes, it works — the Alesis MicLink is an XLR-to-USB preamp/converter. It doesn't care what's plugged in, only that the signal is balanced, low-Z, mic-level.
Setup
- Bass → Amp DI Out (XLR) → MicLink XLR → USB → PC
- OR Bass → DI Box (XLR) → MicLink → USB (cleaner, no amp color)
- Set MicLink gain so peaks hit -12 to -6 dBFS in DAW
- Record in DAW (Reaper, Audacity, Logic, etc.)
Caveats
- No instrument-level input. Passive bass direct into MicLink = weak, impedance mismatch. Use amp DI or DI box.
- No Hi-Z option. Dedicated interfaces (Focusrite, SSL, Audient) have Hi-Z for passive bass direct.
- 48V phantom — MicLink provides it; turn off if DI box doesn't need it.
- Latency — USB 1.0 class-compliant; ~10–15 ms round-trip. Acceptable for tracking, not monitoring.
Better for Bass
2-in/2-out interface with Hi-Z (Scarlett 2i2, Volt 2, EVO 4) — $150–200. Records bass direct + mic simultaneously; lower latency; proper headphone out.